Flanges

Hastelloy Flanges Manufacturer, Supplier in Tanzania

Nickel Alloy UNS N06200 Socket Weld Flange, Nickel Alloy C2000 Threaded Flanges, Nickel Alloy 2.4600 Threaded Flange Manufacturer in Dar es Salaam, ASME SB564 UNS N10665 Hastelloy Orifice Flange Stockist, C22 Alloy Ring Type Joint Flange Distributor, G30 Alloy Ring Type Joint Flange Stockist, Nickel Alloy ASTM B564 UNS N06002 Blind Flanges Exporter, 2.4602 Hastelloy Alloy Plate Flanges Manufacturer, Hastelloy G30 Blind Flanges Stockist in Dodoma, Nickel Alloy UNS N10675 Socket Weld Flange Supplier in Tanzania.

Hastelloy Alloy UNS N10675 Blind Flange, Hastelloy ASME SB564 X Lap Joint Flange Stockist, Alloy 2.4617 Plate Flanges, C2000 Hastelloy Alloy Slip On Flange Stockist in Mbeya, X Hastelloy Long Weld Neck Flange Manufacturer, Nickel Alloy ASTM B564 59 Blind Flange Distributor, Alloy 2.4819 Tongue & Groove Flange Manufacturer in Dodoma, Hastelloy Alloy UNS N10276 Lap Joint Flange Stockist in Tanzania.

Robust Special Metals is recognized Producer, Dealer, and Exporter of Hastelloy C-276 Flanges in Dar es Salaam Tanzania. We have Nickel Alloy C-22 Flange, which are available in a variety of sizes, measurements, and requirements according to our esteemed customers needs. These Alloy C2000 Flanges are fabricated of the Nickel Alloy nickel Chromium Molybdenum alloy. It is made up of 50.99 percent Nickel, 15 percent Molybdenum, and 14.5 percent Chromium as well as carbon, manganese, silicon, sulfur, cobalt, iron, and phosphorus traces are seen in this material. The melting point of Alloy 59 Flanges is 1370 degrees Celsius. Because of the excellent melting point, the flanges may operate at higher temperatures. The material also has a minimal tensile strength of 790 mpa and a low tensile stress of 355 MPa. Although all or most of the typical welding procedures for Nickel Alloy C2000 flange can be utilized, the Oxyacetylene and immersed arc procedure are not suggested whenever the produced products is to be utilized in corrosive applications.

The Nickel Alloy 59 Flange is produced using a forging process, which toughens the flanges. These Flanges might have specifications as well as other standards like as ANSI, ASME, EN, or DIN. These flanges is sold in a several of width ranging from 12 inches to 60 inches. Alloy G30 Flanges are typically solution heat-treated at 2050 degrees Fahrenheit and immediately made smooth. Hastelloy 59 Flanges treated preferably in the tempered state. Nickel Alloy G30 Flanges is the alloy is favorable in any sector that deals with harsh elements on a frequent basis.

Robust Special Metals is a notable producer , and supplier of these Alloy B3 Pipe Flanges which are also accessible in variety of Pressure ratings here. Pressure class may differ from 150 to 2500, and Pressure Nominale-6 to Pressure Nominale-4. These flanges are used in various applications, including offshore oil drilling, oil and gas processing, harsh chemicals, Pharmaceutical Production, petrochemicals, wastewater machinery, heaters, and Cabin Condensers and others. Some of the Nickel Alloy Alloy B3 Flanges, are utilized to momentarily or otherwise permanently seal a pipeline. The every flange type and uses requirements may vary.

Hastelloy Alloy Flanges Specification in Tanzania
Specifications ASTM B564 / ASME SB564
Standard ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Size 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Flange EN 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Common Types Forged / Threaded / Screwed / Plate
Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Test Certificates EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report etc.
Hastelloy Alloy Flanges Stock And Supply Range in Tanzania
Weld Neck Flange
Weld Neck Flanges
  • Nickel Alloy UNS N10665 WNRF Flanges in Mwanza
  • B3 Hastelloy Welding Neck Flanges in Mbeya
  • UNS N06200 Nickel Alloy Weld Neck Flanges Stockist in Moshi Urban
  • X Hastelloy Alloy Raised Face Weld Neck Flanges in Tanzania
  • ASTM B564 Hastelloy Alloy UNS N06022 WNRTJ Flanges Exporter in Dar es Salaam
  • Hastelloy 2.4819 WNRF Flange in Dodoma
  • ASME SB564 Nickel Alloy UNS N06059 Raised Face Weld Neck Flanges in Tanzania
Slip On Flange
Slip On Flanges
  • Alloy UNS N10665 Slip On Flanges in Tanzania
  • Hastelloy UNS N06022 SORTJ Flanges Exporter in Mbeya
  • UNS N10675 Hastelloy Alloy Slip On Flanges in Dar es Salaam
  • Hastelloy Alloy UNS N10276 Slip On Flanges in Moshi Urban
  • ASTM B564 2.4675 Nickel Alloy SORF Flanges Supplier in Dodoma
  • ASME SB564 X Hastelloy Slip On Flange in Mwanza
  • Hastelloy Alloy UNS N06059 SORF Flange in Tanzania
Blind Flange
Blind Flanges
  • Nickel Alloy 2.4819 BLRF Flanges in Mwanza
  • 2.4675 Hastelloy Alloy BLRTJ Flange Supplier in Mbeya
  • B3 Hastelloy BLRTJ Flanges in Dodoma
  • UNS N06002 Alloy Blind Flange in Moshi Urban
  • Hastelloy 2.4617 BLFF Flanges in Moshi Urban
  • ASME SB564 Hastelloy Alloy C22 BLRF Flanges Supplier in Dar es Salaam
  • ASME SB564 Hastelloy 59 BLFF Flange in Tanzania
Socket Weld Flange
Socket Weld Flanges
  • UNS N10675 Alloy SWRTJ Flange in Dodoma
  • ASTM B564 Alloy UNS N06022 SWRTJ Flange Distributor in Moshi Urban
  • X Hastelloy SWRF Flanges in Mwanza
  • Hastelloy B2 SWRTJ Flange in Mbeya
  • Nickel Alloy UNS N10276 SWRTJ Flange in Tanzania
  • UNS N06200 Alloy SWRTJ Flange Stockist in Dar es Salaam
  • ASTM B564 Hastelloy 59 SWRTJ Flanges in Tanzania
Threaded Flange
Threaded Flanges
  • Hastelloy Alloy C22 Threaded Flange Exporter in Mwanza
  • ASME SB564 X Nickel Alloy Threaded Flange in Mbeya
  • Nickel Alloy 2.4819 Threaded Flanges in Dar es Salaam
  • ASTM B564 B3 Hastelloy Threaded Flange in Tanzania
  • Hastelloy Alloy G30 Threaded Flanges in Dodoma
  • 2.4675 Alloy Threaded Flange Distributor in Moshi Urban
  • Nickel Alloy UNS N10665 Threaded Flange in Tanzania
Lap Joint Flange
Lap Joint Flanges
  • Hastelloy C22 LJRF Flange Stockist in Tanzania
  • Nickel Alloy 59 LJFF Flange in Mwanza
  • UNS N06200 Alloy LJFF Flange Supplier in Tanzania
  • ASTM B564 Alloy 2.4617 Lap Joint Flange in Moshi Urban
  • 2.4665 Hastelloy Lap Joint Flange in Dar es Salaam
  • ASME SB564 Hastelloy Alloy UNS N10276 LJFF Flange in Dodoma
  • B3 Alloy Lap Joint Flange in Mbeya
Spectacle Blind Flange
Spectacle Blind Flanges
  • Hastelloy Alloy 2.4602 Spacer Blind Flanges Manufacturer in Dar es Salaam
  • B3 Nickel Alloy Spectacle Blind Flanges in Tanzania
  • Hastelloy 59 Spacer Blind Flange in Dodoma
  • ASTM B564 Nickel Alloy 2.4617 Spectacle Blind Flange in Mbeya
  • UNS N06002 Nickel Alloy Spectacle Blind Flange in Moshi Urban
  • ASTM B564 Hastelloy 2.4819 Spectacle Blind Flanges in Tanzania
  • 2.4675 Hastelloy Alloy Spacer Blind Flanges Supplier in Mwanza
Ring Type Joint Flange
Ring Type Joint Flanges
  • C2000 Hastelloy Alloy Ring Type Joint Flange Stockist in Tanzania
  • ASME SB564 B3 Hastelloy Ring Type Joint Flanges in Dar es Salaam
  • Nickel Alloy C22 Ring Type Joint Flange Distributor in Tanzania
  • ASME SB564 2.4665 Hastelloy Alloy Ring Type Joint Flange in Mbeya
  • Alloy C276 Ring Type Joint Flanges in Moshi Urban
  • Nickel Alloy 59 Ring Type Joint Flanges in Dodoma
  • Alloy UNS N10665 Ring Type Joint Flange in Mwanza
Long Weld Neck Flange
Long Weld Neck Flanges
  • 2.4665 Nickel Alloy Long Welding Neck Flange in Tanzania
  • ASME SB564 Hastelloy Alloy 2.4819 LWN Flange in Mbeya
  • UNS N06200 Nickel Alloy Long Weld Neck Flange Supplier in Tanzania
  • 2.4600 Hastelloy Alloy Long Welding Neck Flanges in Mwanza
  • ASTM B564 Alloy C22 LWN Flange Stockist in Dodoma
  • Alloy B2 Long Weld Neck Flanges in Dar es Salaam
  • Alloy UNS N06030 LWN Flanges in Moshi Urban
Hastelloy Flanges Equivalent Grades in Tanzania
STANDARD WERKSTOFF NR. UNS
Hastelloy B2 2.4617 N10665
Hastelloy B3 2.4600 N10675
Hastelloy C2000 2.4675 N06200
Hastelloy C22 2.4602 N06022
Hastelloy C276 2.4819 N10276
Hastelloy X 2.4665 N06002
Hastelloy G30 N06030
Hastelloy 59 N06059
Widest Stock Of ASTM B564 Hastelloy Flanges in Tanzania
  • Hastelloy UNS N10665 Raised Face Weld Neck Flange in Mwanza
  • UNS N06059 Orifice Flanges in Mbeya
  • Alloy 2.4600 Plate Flanges in Moshi Urban
  • Alloy ASTM B564 UNS N10276 Ring Type Joint Flanges Manufacturer in Moshi Urban
  • ASME SB564 Alloy 2.4602 Spectacle Blind Flanges Supplier in Dodoma
  • Hastelloy Alloy G30 59 Blind Flange in Tanzania
  • Nickel Alloy UNS N06022 Spectacle Blind Flange in Dar es Salaam
  • ASTM B564 UNS N06200 Orifice Flange in Dodoma
  • UNS N06002 Hastelloy Alloy Blind Flange in Tanzania
  • Alloy UNS N10665 Long Weld Neck Flanges in Tanzania
  • Hastelloy Alloy 2.4617 Ring Type Joint Flanges in Tanzania
  • Alloy C276 Spectacle Blind Flanges Supplier in Mwanza
  • Nickel Alloy UNS N06022 Lap Joint Flange Manufacturer in Mbeya
  • Alloy G30 UNS N06059 Long Weld Neck Flanges in Moshi Urban
  • ASTM B564 UNS N06059 Raised Face Weld Neck Flange in Dar es Salaam
  • ASTM B564 Nickel Alloy B3 Socket Weld Flanges in Dodoma
  • ASTM B564 Hastelloy 2.4602 Orifice Flange in Dar es Salaam
  • C2000 Raised Face Weld Neck Flange in Mwanza
  • X Nickel Alloy Ring Type Joint Flanges in Tanzania
  • Nickel Alloy B2 Lap Joint Flange in Moshi Urban
Application Of Hastelloy Alloy Flanges in Tanzania
Applications
Oil & Gas 50%
Chemical 87%
Power Plants 74%
Nuclear Plants 70%
Ship Building 84%
Paper & Pulp 65%

UNS N06059 Hastelloy Lap Joint Flanges Distributor in Mwanza, Hastelloy Alloy X Blind Flange Distributor in Dodoma, Tanzania, Hastelloy ASTM B564 UNS N06002 Flange, Hastelloy Alloy X Slip On Flanges Manufacturer in Mbeya, UNS N10276 Alloy Lap Joint Flanges Distributor in Moshi Urban, B3 Alloy Slip On Flanges Manufacturer in Dar es Salaam, ASME SB564 C22 Alloy Socket Weld Flanges Stockist in Dar es Salaam, Alloy C22 Long Weld Neck Flanges Manufacturer in Dodoma, Hastelloy Alloy UNS N06030 Socket Weld Flange Manufacturer in Mwanza, Hastelloy UNS N06002 Plate Flange Stockist in Dodoma, Hastelloy Alloy 2.4665 Ring Type Joint Flange Stockist in Tanzania, Nickel Alloy ASME SB564 UNS N06059 Tongue & Groove Flange Manufacturer in Tanzania.